Not all 4 wheel boxes come on the same day. Don't worry is one or more is late. Check the tracking code and open "1 of 4 Piece Shipment" for details on the others.
Extra items will be taped to the bottom of ONE wheel box. Such items include- Lug Nuts, Windshield stickers, Small stickers, extra 2-piece valves, paper instructions to hand installers and unnecessary extra blank plastic center cap clips (but they are good for custom projects). Check each box.
The AEROLARRI Wheel Installation Instructions page inside the boxes is pictured below. HAND THIS TO THE INSTALLER so that they get the spoke direction correct, and follow the other 2-Piece valve install procedure.
Lug nut torque is 140 lb-ft (Foot Pounds) for the C8 Corvette
Extra items will be taped to the bottom of ONE wheel box. Such items include- Lug Nuts, Windshield stickers, Small stickers, extra 2-piece valves, paper instructions to hand installers and unnecessary extra blank plastic center cap clips (but they are good for custom projects). Check each box.
The AEROLARRI Wheel Installation Instructions page inside the boxes is pictured below. HAND THIS TO THE INSTALLER so that they get the spoke direction correct, and follow the other 2-Piece valve install procedure.
Lug nut torque is 140 lb-ft (Foot Pounds) for the C8 Corvette
Windshield Sticker Instructions (Large version; shown)- To achieve the top windshield curvature of any car, the space between the letters should be cut ALMOST to the top. Slightly crimping the top connected parts helps with positioning on the car. Center the L of AEROLARRI and tape that square just below the window line. Then tape the other letters from the center, outward- each parallel to the top window line. Peel the bottom half part way, and fold it down thereby sticking the letter to the window surface in position. Peel the rest of the underside off while pressing down on the growing sticker part. Repeat for all the letters. Then remove the top transfer paper on a sharp angle. The vinyl stickers remove cleanly in one whole piece. There will be little to no residue. However, using isopropyl (rubbing) alcohol will remove absolutely 100% of any residue left, instantly. Professional wrap and PPF detailers actually do this method too. Picture instructions are below for good measure:
Note: Smaller, straight logos do not need this curvature method.
Note: Smaller, straight logos do not need this curvature method.
TPMS Sensors are not included with any set of wheels. We suggest reusing the existing ones off your original wheels, or getting OEM versions from a trusted supplier.
The C8 Corvette lug nuts are gigantic and may, or may not work with our wheels. The important thing to test is whether both seats mate flush with each other. Also it may be hard to find a socket with thin enough walls to slide past the lug nut openings on the wheels.
The C8 Corvette lug nuts are gigantic and may, or may not work with our wheels. The important thing to test is whether both seats mate flush with each other. Also it may be hard to find a socket with thin enough walls to slide past the lug nut openings on the wheels.
If you ordered 21x13 size wheels for the Base C8 Stingray, if the car has been on an installation lift for a long time, the suspension hydraulic fluid slowly seeps out causing the suspension to drop both down AND inward, since it travels on a circular arc. This might scare novice installers who could comment that it is a tight fit.. Ignore them. Simply install the 21x13 wheels, and lower the car onto the ground, and everything will be 100% perfect. No spacers are required. And do not let them scare you. We have done this more than 100 times.